Brake Repair Warning Signs: Common Brake-Related Red Flags
There’s simply no way to overstate the importance of having a functional brake system in your Vancouver, Washington-area vehicle. This system is indispensable when it comes to protecting you, your passengers, and other drivers.
But like any other auto component, your brakes won’t stay in peak condition if they don’t get regular professional attention. And due to the crucial role this system plays, you can’t afford to ignore any potential signs of brake trouble. If you think you might be overdue for brake service, read on to learn about the signs commonly associated with a need for brake repairs.
Look For These Brake Repair Warning Signs
All kinds of indicators can point to issues with your vehicle’s brake system. Some of the most common brake-related red flags include:
Unusual Noises
Do you hear a deafening screech or squeal when you hit the brakes? It’s no coincidence that this noise is as loud as it is — after all, it’s explicitly designed to grab your attention. These sounds are typically caused by the wear indicators built into many brake pads. If you hear this sound, your pads might be worn to the point where they are overdue for replacement.
Of course, this isn’t the only unpleasant sound that can come from your brake system. Another noise often associated with brake issues is a clicking or rattling sound. That could mean the brake caliper part responsible for holding your brake pads in place has gotten loose.
A Soft Brake Pedal
When you press down on your brakes to slow or stop your car, you should feel a considerable amount of resistance from your brake pedal. However, you might notice that your brake pedal feels soft or spongy instead. That usually means there are issues with your brake system’s hydraulic pressure.
Brake Fluid Leaks
Of course, brake fluid leaks aren’t something that should normally happen in your vehicle. The good news is that these leaks are relatively easy to spot. Watch out for light brown or yellow puddles under your car, and set up an appointment for repairs if you notice them.
Brake Fade
The term “brake fade” refers to what happens when your brake system’s stopping power is significantly reduced. The easiest way to notice brake fade is by paying attention to how long it takes your car to stop after you push down on the brake pedal. Brake fade is often caused by sustained or repeated brake use, particularly when driving at high speeds or transporting heavy loads.
Pulling to One Side
While many drivers assume their brake pads wear at an identical rate, this isn’t always the case. If a pad on one side of your vehicle is more worn than your other pads, your car could pull toward one side or the other when you brake. There are some other factors that could cause this situation, but no matter what’s going on, your vehicle needs professional attention.
Brake Pedal Vibrations
The usual cause of a vibrating brake pedal is a breakdown in the resin holding your brake pads together. Like all other brake issues, this should be dealt with right away.
Are Your Brakes to Blame?
Obviously, symptoms like unusual noises can be alarming for any driver in Vancouver. Still, you’ll need to remember that serious brake issues aren’t the only factors that can cause these warning signs. As an example, if your car has just been out in the rain, the moisture covering your brakes could lead to squeaking or grinding sounds until it evaporates. Other potential causes of brake noise include rust, grime, and dirt.
Still, that doesn’t mean that brake problems aren’t to blame; it’s just that there could be alternate explanations. To really figure out what’s going on with your brakes, it’s best to let an ASE-certified mechanic look at them.
Protect Your Brake System With Inspections
If you spot any of the issues listed in this article, it’s wise to take your car to a qualified brake shop for an inspection. There, you’ll get a thorough explanation of your brake issues and a quick fix for any issues that necessitate brake repair.
Some of the brake services that your Vancouver brake shop of choice should be able to provide include:
- Brake rotor/drum resurfacing
- Brake caliper lubrication
- Brake rotor and caliper installation
- Wheel bearing inspection/repacking
- Brake pad/shoe installation
- Brake pad flushes and replacements
A Brake Shop You Can Count On
Are you a Vancouver resident needing brake inspection, maintenance, or repair services? If so, your best bet for this work is Gaynor’s Automotive. Our qualified mechanics can tackle anything from a quick brake pad replacement to a full-fledged brake repair job. And no matter what services your brakes need, you’ll get the quality workmanship you deserve at a fair price!
Whether your brakes have lost stopping power or are just making strange noises, fixing potential brake problems should always be at the top of your list of priorities. Let the brake experts working at Gaynor’s Automotive take a look at your brakes today!